Content
Smart Access
Smart Lock
Productfeatures
Let's begin
Connect & Control

SMART ACCESS

Improved waste separation by influencing behaviour

Waste Vision’s access control system does much more than apply selective access to waste containers alone.

The system is a solution for reducing the amount of residual waste, to collect cleaner resources (such as organic waste, textiles, household packaging waste, paper and diapers), and to influence your users’ behaviour.

Waste Vision offers access control systems which can be mounted on all types of waste containers, both below- and aboveground.

Connect & Control

Smart Opening

Users can open the container with a non-contact device, namely their pass, tag, phone or watch.

The reader is in immediate contact with the owner of the card, tag, phone or watch and informs him or her of the number of their deposits, their outstanding balance and other waste information.

By displaying a fill rate light on the container, we show the user whether or not it is available for use.

Connect & Control

Smart Reader

The smart reader is equipped with the latest network communication technology. The reader automatically chooses the strongest available network, so that the system keeps itself connected and operational continuously. It is accessed remotely for system updates.

Daylight saving and time zones are recognised by the reader, and the clock settings are adjusted automatically.

Connect & Control

Smart Power

Our access and fill-level systems consume very little power. In order to provide power to the battery, the containers are equipped with solar cells.

The battery and accumulator are placed inside an IP67 case, which is guaranteed to be water- and dustproof. It has a very durable IK 08 class daylight cell.

The energy system has a very wide temperature range – from minus 25 degrees Celsius to 85 degrees Celsius – and has its own fuse.

The status of the battery is always visible. This is to ensure that the system operates properly and to replace the batteries on time.

The reader is battery-efficient, it has a very sturdy IK08 TFT display and consists of a large internal memory for the transactions and user lists.

 

 

Connect & Control

Smart Lock

The sturdy electronic locks are designed with a smart system. They are produced after 25 years of practical experience in the most extreme circumstances.

Several versions of the locks can be provided, so that they can be matched with every type of container, both with a drum as well as with a hatch.

The lock unit is made of stainless steel and plastic, so that the unit is optimally protected against corrosion and the lock is prevented from freezing.

The owner is able to open, or close, every container remotely in case of calamities and maintenance work.

Connect & Control

Smart detection

The access system detects situations like a jam in the opening or when the container has been emptied. This information is sent immediately to the TardifWeb software system.

Connect & Control

Smart Interaction

Waste Vision links a wide range of sensors to her access control systems. This allows you to monitor remotely if waste has been placed next to the container, for example, or how full the container is.

Interested in our brochure?

We have summarised all Waste Vision related information and Connect & Control related services and products in this brochure. This digital brochure will be emailed to you as a PDF. Nice and easy!

Brochure Connect & Control (EN)

Reader

Robust Casing IK08

Reader

5G Catm1 LteM Realtime Communication

Reader

Temperature range –50oC to 85oC.

Reader

Suitable for Mifare, DESfire and NFC & Bluetooth (Smartphone & watch).

Reader

Large memory for access management and transactions

Designed and produced in The Netherlands

Productfeatures

Ensured operation of the access systems is essential for the quality and continuity of your services.

These are guarantees that you, as a customer, should count on. To provide assurance that continuity is guaranteed, we design and test our products on several relevant factors, such as its guaranteed operation, sturdiness and continuous and efficient performance.

All electronic products are designed and produced by Waste Vision in The Netherlands.

Let's begin

We meet all your needs throughout the process, from first orientation to eventual maintenance. You decide which type of support you require.

Step 1: Meet & greet

During an introductory meeting you get to know our organisation and we will assess your needs. We will tell you more about our products and applications.

1
Step 2 Designing

We will provide you with a (digital) design, to ensure proper installation of the system. During this phase we offer you the option to test the access control systems as well.

2
Step 3: Exploring the software

Installing the hardware goes hand in hand with using our software and we use TardifWeb, a very user-friendly system. Our team is available to support you, in case you need it.

3
Step 4: Setting the delivery

Once you decide to purchase our access control systems, we agree the supply conditions and schedule with you. The lead time for the above-mentioned process depends on the size of the order. Some of our systems can be delivered from stock, but for larger orders we will agree on a longer lead time with you, which matches your project.

4
Step 5: Operational first

You do not receive an invoice before the work is completed and the system is operational.

5
Step 6: Easy installing

Standard installation instructions are always provided with our product deliveries. If you are short of hands, our technical team is available to take over at any time.

6
Step 7: Delivery assurance

Plug, Play & Interact! That is the delivery assurance we offer you when you choose Waste Vision.

7
Currently, Waste Vision maintains more than 45.000 access control systems in Europe. Our systems are installed on the containers of all large suppliers in Western Europe, such as:

1. The lead time for the process described above, depends on the size of the order. Some systems can be delivered from stock, but for larger orders we will confirm a lead time which is more suitable for your project.

2. You will receive your invoice from Waste Vision when we have completed our work, so at the moment that the fill rate systems are delivered to you. After that, you will receive a monthly invoice for the subscription you took out with us.

Want to know what
we can do for you?

Briefly introduce yourself, ask your question and we will contact you within 24 hours (Mon-Fri).

The Netherlands
Norway
Germany
Belgium
France
Switzerland
Let us know who you are with this form