With our fill-level system, you are able to very accurately measure the fill-level of containers above- and belowground.
If you monitor the fill-level and the speed at which the container is filled, it is possible to predict when a container will actually be full. Collecting waste with a fixed schedule is outdated.
With fill-level identification and prediction, you only empty when it is really necessary.
You reduce your mileage without containers overflowing, so you save.
The 3D fill-level system is linked to Route Vision software, so you get the maximum return from this solution. You gain ground in terms of service, the environment and efficiency!
Waste Vision’s 3D fill-level system is a self-contained system which is easily installed. After that it operates and maintains itself. We therefore speak of: Plug, Play & Interact! The system calibrates itself when placed in a container. It measures the available space for accurate fill-level identification and it uses daily protocols to ascertain whether the system is 100% operational.
The 3D fill-level system of Waste Vision uses 3 ultrasonic fill level sensors, which is unique for the industry. 3D sensors provide the most reliable and accurate fill-level measurements. The system can be used independently or it can be connected to the Waste Vision access control system.
3 Adaptive ultrasonic sensors
Measurement from 2 till 400 centimetres.
Outstanding water and dust protection.
The system calibrates itself when placed in a container.
A fill-level system’s guaranteed operation is essential for the quality and continuity of your service. These are the guarantees that you, as our customer, can count on.
To offer this security and to secure this continuity, we pay attention to several important points when designing and testing our products. Guaranteed operation, sturdiness and sustainable performance, are among them.
All our electronic products are designed and produced by Waste Vision in The Netherlands.
If you are interested in our fill-level systems, we would be happy to show you that Waste Vision is the best choice! We will support you from A to Z and you as our customer, decide the level of assistance that you need.
During a meet & greet you learn more about our organisation and we will assess your situation. We will also tell you all about our products and applications.
We will provide you with a (digital) design, so the system can be installed correctly. During this phase you will be able to test the fill-level system.
Implementing hardware goes together with using our software and we use Route Vision. This software enables you to monitor your containers and plan and design the most efficient route
Would you decide to purchase our fill-level systems, then we will finetune the supply conditions and schedule with you. The lead time of this process depends on the size of your order. Some systems can be supplied from stock whereas for larger orders we will agree a lead time aligned to your project.
You always receive clear instructions for installing our systems with every product delivery. If you are short of hands, our technical team will carry this out for you.
You will not receive an invoice before the work has been completed and the system is operational.
Plug, Play & Interact! This is the delivery assurance you benefit from when you choose Waste Vision.
1. The lead time for the process described above, depends on the size of the order. Some systems can be delivered from stock, but for larger orders we will confirm a lead time which is more suitable for your project.
2. You will receive your invoice from Waste Vision when we have completed our work, so at the moment that the fill rate systems are delivered to you. After that, you will receive a monthly invoice for the subscription you took out with us.